Utilise one of our coring teams on your site for as little as £385/day!
ADP Group recognise that hydraulic breaking is maybe a thing of the past for many reasons, the important issues being HAVS or Hand Arm Vibration Syndrome and the less important ones being the plain and simple aesthetics of the finished product.
Concrete coring is a method of removing hard standing such as reinforced concrete. It uses a large diamond tipped core barrel to drill through the hard top for easy and clean removal prior to vacuum excavation or hand-pitting, its free from bursting or spoiling of the surrounding area and due to the method leaving a clean edge its easily re-instated using our sleeves and covers which our operators can cement in place to leave a safe, sealed and professional looking finished product, ready for extension via vacuum excavation and rotary drilling.
ADP Group own and operate several different variations of concrete coring equipment with different size core barrels for differing projects, we have coring units mounted on vacuum excavation trucks to allow just one vehicle to mobilise to site, we have units mounted in their own vans and also utilise our drilling rigs to core, so whether you want the complete service or just some coring alone, we can help.
Bolt-Down Coring Rig
ADP Group have numerous bolt-down or “stand alone” diamond coring units/rigs, these can either bolt down to the floor via a single point or mount on the rear of a vac-ex truck or Land Rover (via an ADP Group designed mount), this keeps them safe, sturdy and ensures a neat accurate core.
These units are carried on several of our vac-ex units and also in specialist vans and Land Rovers.
ADP Group’s stand alone, bolt-down coring rigs are a cost effective, neat, fast and safe method of removing concrete hard standing.
Coring Sizes:
75mm – 375mm diameter coring barrels available Barrels up to 1000mm in depth available, deeper coring available through use of extensions
Utilicor Minicor Unit
The Utilicor Minicor unit is carried on a hydrostatic wheeled loader, which allows for quick set up and maximum output across both large and small sites. If you are looking to core a large number of locations in one day then the Minicor is the perfect tool for the job.
The Mincor can core holes up to 600mm in diameter and with a centre pilot hole, which allows for safe removal of the core, easy reinstatement and smooth consistent coring through the toughest concrete.
The wheeled carrier unit is hydro-statically driven and offers a telescopic boom on an articulated carriage, meaning that once onsite the unit moves efficiently around site, setting up in those hard to reach locations, in no time at all – meaning maximum output!
Locations can be progressed at rates of 25-50mm per minute, through even the toughest concrete.
The Minicor can be supplied with Utilibond, a specially designed reinstatement product which makes neat, consistent and reliable reinstatements that are completely dry and ready to be driven over in just 30 minutes!
Coring Sizes:
150mm – 600mm diameter coring barrels available Barrels up to 1000mm in depth available, deeper coring available through use of extensions
Utilicor MPX Trailer Rig
The Utilicor MPX is mounted on a trailer, which allows for quick set up and maximum output. If you are looking to core a lot of holes in one day then the MPX is the perfect tool for the job. The MPX can core holes up to 600mm in diameter and with a centre pilot hole, which allows for safe removal of the core, easy reinstatement and smooth consistent coring through the toughest concrete.
Locations can be progressed at rates of 25-50mm per minute, through even the toughest concrete!
The MPX can be supplied with Utilibond, a specially designed reinstatement product which makes neat, consistent and reliable reinstatements that are completely dry and ready to be driven over in just 30 minutes!
Coring Sizes:
150mm – 600mm diameter coring barrels available Barrels up to 1000mm in depth available, deeper coring available through use of extensions
